www.gusucode.com > Wind Turbine Model工具箱matlab源码 > Wind Turbine Model/Wind_Turbine_Model_R17b/Scripts/Slide_Prep/Wind_Turbine_Slide_Prep_Yaw_Act.m
% Copyright 2009-2017 The MathWorks(TM), Inc. colordef black; %Special_Blue = [0 204 255]/255; Special_Blue = [0 0.5 1]; %if(1==2) time_yaw = Nacelle_Yaw_DATA.time; Yaw_Command_Data = Nacelle_Yaw_DATA.signals.values(:,2); Yaw_Angle_Data = Nacelle_Yaw_DATA.signals.values(:,1); Actuator_Torque_Data = Yaw_Actuator_Torque_DATA.signals.values; %end figure(1); clf; %new_sb211_h = 400; set(gcf,'Position',[765 405 449 336]); %set(gca,'Position',[0.15 0.63/522*new_sb211_h 0.775 0.341163*522/new_sb211_h]) %POSITION_211 = [0.15 0.583837 0.775 0.341163*522/new_sb211_h]; subplot(211) yc_h = plot(time_yaw,Yaw_Command_Data,'color','m','LineWidth',3); hold on ya_h = plot(time_yaw,Yaw_Angle_Data,'color','y','LineWidth',3); hold off title_h = title('Yaw Angle (deg)'); ylabel_h = ylabel('Angle (deg)'); set(title_h,'FontSize',14); set(ylabel_h,'FontSize',12); grid on set(gca,'Box','on'); axis([0 time_yaw(end) -5 5]); legend_set = {'Command' 'Measured'}; leg_h = legend(legend_set,'Location','Best'); subplot(212) yaf_h = plot(time_yaw,Actuator_Torque_Data,'color','r','LineWidth',3); title_h = title('Actuator Torque (Nm)'); xlabel_h = xlabel('Time (s)'); ylabel_h = ylabel('Torque (Nm) '); set(title_h,'FontSize',14); set(xlabel_h,'FontSize',12); set(ylabel_h,'FontSize',12); grid on set(gca,'Box','on'); axis([0 time_yaw(end) -4e5 4e5]);